ROUTER PLUGIN
77Speed Router Tutorial
OpenWrt / iStoreOS · ASUS Merlin · Main router or bypass router
1Choose a mode: main router or bypass router

Main router: install the plugin on the router that dials up / connects to the modem and hands out IP addresses. Nothing needs to change on your devices. Best if you only have one router.

Bypass router: you keep your main router and add a second router on one of its LAN ports just for the proxy. Devices need their gateway set to the bypass router and DNS set to a public address (for example 223.5.5.5). Best if you don't want to touch the main router, or only want some devices proxied.

In both modes the router's own traffic is not proxied, and LAN IPv6 is not proxied; we recommend turning off LAN IPv6.

2Pick the package for your router system
OpenWrt / iStoreOS
Requires OpenWrt 24.10 or iStoreOS 24.10 · x86_64 / aarch64_generic / mipsel_24kc · more than 16 MB flash

Log in over SSH and run opkg print-architecture | grep -E 'x86_64|aarch64_generic|mipsel_24kc' to find your architecture.

OpenWrt downloads & full guide
ASUS Merlin (Asuswrt-Merlin) beta
Requires Merlin 384.15+ and kernel 3.2+ · arm64 / armv7 · older 2.6-kernel models such as RT-AC68U are not supported

In the router web UI, Administration → System: enable JFFS custom scripts and SSH (LAN only). Then run uname -m; uname -r over SSH to check the architecture and kernel.

Merlin downloads & full guide (Chinese)

Do not run other proxy plugins at the same time (OpenClash, PassWall, Nikki, HomeProxy, fancyss, Merlin Clash, etc.).

3Install on the router

OpenWrt / iStoreOS: set ARCH to your architecture and paste the whole block into SSH:

ARCH=x86_64          # or aarch64_generic, mipsel_24kc
cd /tmp
u=https://yun.qiqi.cat/openwrt/$ARCH
wget "$u/77speed-core_1.14.2-r2_$ARCH.ipk"
wget "$u/luci-app-77speed_0.4.0-r1_all.ipk"
wget "$u/SHA256SUMS"
grep '\.ipk$' SHA256SUMS | sha256sum -c -
opkg update
opkg install ./77speed-core_1.14.2-r2_$ARCH.ipk ./luci-app-77speed_0.4.0-r1_all.ipk

ASUS Merlin:

ARCH=arm64          # or armv7
VER=0.1.0
cd /tmp
u=https://yun.qiqi.cat/merlin
curl -fLO "$u/77speed-merlin-$VER-$ARCH.tar.gz"
curl -fLO "$u/77speed-merlin.SHA256SUMS"
grep "$ARCH.tar.gz" 77speed-merlin.SHA256SUMS | sha256sum -c -
tar -xzf "77speed-merlin-$VER-$ARCH.tar.gz"
cd 77speed-merlin
sh ./install.sh

Every file must show OK in the checksum step; otherwise download again. The router itself needs internet access. To upgrade, run the same block again; your account and settings are kept.

4Set the mode and the network

On the plugin page (OpenWrt: Services → 77Speed; Merlin: Tools → 77Speed) set the deployment mode to main router or bypass router, then save and apply.

Main router: nothing else to set; the plugin takes over DNS automatically. On Merlin, turn off DNS-over-TLS on the WAN page.

Bypass router (example: main router 192.168.1.1, bypass router 192.168.1.2):

  • Give the bypass router a static LAN address 192.168.1.2, gateway 192.168.1.1, DNS 223.5.5.5, and turn off its DHCP server (Merlin: switch to AP mode).
  • All devices: in the main router's DHCP settings, hand out gateway 192.168.1.2 and DNS 223.5.5.5.
  • Some devices: set the gateway to 192.168.1.2 and DNS to 223.5.5.5 manually on those devices.

Use a public DNS address, not the LAN address of either router; otherwise domain lookups are not proxied.

5Sign in and pick a node
  • OpenWrt: open http://router-address/77speed/, sign in with your 77Speed account, then click a node.
  • Merlin: in Tools → 77Speed, enter your account (email) and password, click Refresh nodes, choose a node, set Enable to Yes, then save and apply.
  • Choose Global (everything except LAN goes through the proxy) or Rule-based (only traffic matching the rules is proxied).

Sign-in runs in the background; with many nodes or a slow router it can take about half a minute.

6Check that it works

On a computer or phone in your LAN, open https://ipinfo.io: it should show the node's IP and region. Then open https://www.google.com.

If foreign sites don't open: on a bypass router, check the device's gateway and DNS first; in rule-based mode, try switching to Global. More answers in the full guides' FAQ: OpenWrt · Merlin.

Was this answer helpful? 0 Users Found This Useful (0 Votes)