Main router: install the plugin on the router that dials up / connects to the modem and hands out IP addresses. Nothing needs to change on your devices. Best if you only have one router.
Bypass router: you keep your main router and add a second router on one of its LAN ports just for the proxy. Devices need their gateway set to the bypass router and DNS set to a public address (for example 223.5.5.5). Best if you don't want to touch the main router, or only want some devices proxied.
In both modes the router's own traffic is not proxied, and LAN IPv6 is not proxied; we recommend turning off LAN IPv6.
Log in over SSH and run opkg print-architecture | grep -E 'x86_64|aarch64_generic|mipsel_24kc' to find your architecture.
In the router web UI, Administration → System: enable JFFS custom scripts and SSH (LAN only). Then run uname -m; uname -r over SSH to check the architecture and kernel.
Do not run other proxy plugins at the same time (OpenClash, PassWall, Nikki, HomeProxy, fancyss, Merlin Clash, etc.).
OpenWrt / iStoreOS: set ARCH to your architecture and paste the whole block into SSH:
ARCH=x86_64 # or aarch64_generic, mipsel_24kc cd /tmp u=https://yun.qiqi.cat/openwrt/$ARCH wget "$u/77speed-core_1.14.2-r2_$ARCH.ipk" wget "$u/luci-app-77speed_0.4.0-r1_all.ipk" wget "$u/SHA256SUMS" grep '\.ipk$' SHA256SUMS | sha256sum -c - opkg update opkg install ./77speed-core_1.14.2-r2_$ARCH.ipk ./luci-app-77speed_0.4.0-r1_all.ipk
ASUS Merlin:
ARCH=arm64 # or armv7 VER=0.1.0 cd /tmp u=https://yun.qiqi.cat/merlin curl -fLO "$u/77speed-merlin-$VER-$ARCH.tar.gz" curl -fLO "$u/77speed-merlin.SHA256SUMS" grep "$ARCH.tar.gz" 77speed-merlin.SHA256SUMS | sha256sum -c - tar -xzf "77speed-merlin-$VER-$ARCH.tar.gz" cd 77speed-merlin sh ./install.sh
Every file must show OK in the checksum step; otherwise download again. The router itself needs internet access. To upgrade, run the same block again; your account and settings are kept.
On the plugin page (OpenWrt: Services → 77Speed; Merlin: Tools → 77Speed) set the deployment mode to main router or bypass router, then save and apply.
Main router: nothing else to set; the plugin takes over DNS automatically. On Merlin, turn off DNS-over-TLS on the WAN page.
Bypass router (example: main router 192.168.1.1, bypass router 192.168.1.2):
- Give the bypass router a static LAN address
192.168.1.2, gateway192.168.1.1, DNS223.5.5.5, and turn off its DHCP server (Merlin: switch to AP mode). - All devices: in the main router's DHCP settings, hand out gateway
192.168.1.2and DNS223.5.5.5. - Some devices: set the gateway to
192.168.1.2and DNS to223.5.5.5manually on those devices.
Use a public DNS address, not the LAN address of either router; otherwise domain lookups are not proxied.
- OpenWrt: open
http://router-address/77speed/, sign in with your 77Speed account, then click a node. - Merlin: in Tools → 77Speed, enter your account (email) and password, click Refresh nodes, choose a node, set Enable to Yes, then save and apply.
- Choose Global (everything except LAN goes through the proxy) or Rule-based (only traffic matching the rules is proxied).
Sign-in runs in the background; with many nodes or a slow router it can take about half a minute.
On a computer or phone in your LAN, open https://ipinfo.io: it should show the node's IP and region. Then open https://www.google.com.
If foreign sites don't open: on a bypass router, check the device's gateway and DNS first; in rule-based mode, try switching to Global. More answers in the full guides' FAQ: OpenWrt · Merlin.
